NAND Flash Controller

Name: NAND Flash Controller
Brand: iWave Global
Availability: InStock

iWave’s NAND Host Controller provides an easy interface to access NAND Flash Memory devices. This IP forms a bridge between the NAND flash and User (Processor), enabling to store, read and erase the data in NAND flash. The Controller has two different variants depending on the availability of the processor towards user side. One being the AXI complaint interface for accessing through processor and other is custom interface which can be used without the processor.

CONTACT SALES

Documents

Brochure
Storage IP Cores ebook
Datasheet
Resource Utilization

Accessories

FMC Daughter Card

Features

Details

NAND Flash Controller

8-bit Asynchronous or Synchronous Interface to NAND device
SLC or MLC NAND Flash Memory
Page Size: Up-to 16KByte (Compile time configurable)
16K-Byte Buffer for write data
16K-Byte Buffer for read data
Separate Chip Select, Write Enable, Read Enable and Ready/Busy for each die and the IO signals are shared between the die
ECC Logic: Hamming code for 1-bit error correction and 2- bit error detection or BCH code which can correct up to 8 bit errors
Commands supported towards NAND Flash Memory: Read, Reset, Page Program, Block Erase and Read Status

Highlights

Core is compliant with ONFI specification
Supports both processor and non-processor environments with two different variants
This IP will issue the necessary command address and controls all the necessary actions required to program, erase and read data using NAND flash.
Controller supports rich set of NAND commands
Software support includes the standard NAND driver for Linux, u-boot and simplified baremetal NAND driver
Supports standard flash file systems like JFFS2 and UBIFS

KCU105 Dev Kit

iWave NAND host controller IP is tested in Ultrascale FPGA devices from AMD/Xilinx using Kintex Ultrascale based KCU105 dev kit and iWave’s FMC daughter card. This daughter card is mounted with TSOP NAND device from Micron by default and any NAND device with TSOP package can be mounted and tested.
Integration Manual

Zynq 7000 SOM and Dev kit

iWave NAND host controller IP is tested in Zynq 7000 based devices from AMD/Xilinx using iWave Zynq 7000 SOM and Dev kit and iWave’s FMC daughter card. This daughter card is mounted with TSOP NAND device from Micron by default and any NAND device with TSOP package can be mounted and tested.
Integration Manual User Manual

ZED Board

iWave NAND host controller IP is tested in Zynq 7000 based devices from AMD/Xilinx using ZED Board and iWave’s FMC daughter card. This daughter card is mounted with TSOP NAND device from Micron by default and any NAND device with TSOP package can be mounted and tested.Integration Manual User Manual

Arria10 GX dev kit

iWave NAND host controller IP is tested in Arria 10 based devices from Intel using A10 GX dev kit and iWave’s FMC daughter card. This daughter card is mounted with TSOP NAND device from Micron by default and any NAND device with TSOP package can be mounted and tested.
Integration Manual