| Interface Supported |
- SD3.0 interface supports SDR104, SDR50, DDR50, SDR25, SDR12
modes
- High speed Serial-ATA interfaces supporting communications at 1.5Gbps, 3Gbps and 6Gbps data rates
- SFP+ interface supports SFP/SFP+ transceiver modules
- 2Gb to 64Gb NAND Flash modules
- Supports 1-bit or 4-bit data transfer
- Supports for both high capacity (SDHC) and Secure Digital eXtended
Capacity (SDXC)
- Supports High-speed, SDR12, SDR25, SDR50, SDR104 bus speed with
the maximum transfer rate 208MBps
- iWave’s FPGA SD SDIO Host Controller IP can be evaluated with this
platform
|
| Clocking |
- ASFLMPLP 150MHZ LVDS/LVPECL clock generator for SATA interface
- DSC1123 125MHz LVDS/LVPECL clock generator for SFP+ interface
- DSC1123 100MHz LVDS/LVPECL clock generator for user clock
|
| High Speed Serial-ATA Interface |
- Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards
compatible to 1.5Gbps, 3Gbps data rates
- On-board 150MHz reference clock.
- SATA standard connector, Amphenol FCi 10029364-001LF
- iWave’s FPGA SATA Host Controller IP can be evaluated with this
platform
|
| Power Requirement |
- 12V 1A, 3.3V 3A from host device
- Adjustable voltage level (varies from host to host) power from the carrier
to the IO Mezzanine module; VCC_VADJ: 1.5 to 3.3V connected to
onboard level translator
- On board switching regulator 12V to 5V 2.5A for SATA
|
| SFP+ Interface |
- SFP+ Connector which supports 1Gbps or 10Gbps data rates
- On-board 125MHz reference clock
- SFP+ standard connector, Molex 0747540101
- iWave’s FPGA ARINC and sFPDP IP can be evaluated with this platform
|
| Temperature Supported |
0°C to +70°C Commercial grade |
| NAND Interface |
- Open NAND Flash Interface (ONFI) 2.0-compliant
- Single-level cell (SLC) technology
- Generic 48 TSOP Package IC used for compatibility with devices ranging in density from 2Gb to 64Gb
- iWave’s FPGA IP NAND Flash Controller can be evaluated with this
platform
|
| Form Factor |
76.5mm x 69mm |
| Key Features & Benefits |
- Board Connector:
- FPGA Mezzanine Card connector type supporting HPC & LPC
compliant with ANSI/VITA 57.1 FMC Standard
- SD3.0 Interface:
- Compatible with SD/SDIO specification 3.0
|
