ARINC 818 Analyser

1 x HDMI Video Input fixed at Full HD @60 fps.
1 x HDMI Video Output fixed at Full HD @60 fps.
1 x SFP Connector for ARINC 818 Optical or 75-ohm Copper I/P
2 x USB ports for keyboard and mouse.
1 x DP output for GUI application.
Onboard 512GB SDD for storage.

CONTACT SALES

Documents

Features

Details

Hardware Specs

Compliant with ARINC 818 Standard
Capture ADVB frame data up to 64MB
Dynamic link rate configuration, adjustable from 1x up to 10 Gbps at runtime

Transmission Medium: Optical Fiber or 75-Ohm
Copper Medium
Supports video resolutions from 480p@60Hz up to 2k@60Hz in a progressive format.
FPGA based board used to receive and transmit the ADVB via SFP module
Incoming ADVB frames are tapped and captured by FPGA Logic for analysis
Features HDMI/TPG to ARINC818 and ARINC to HDMI converter with customizable resolutions

1 x HDMI Video Input fixed at Full HD @60 fps.
1 x HDMI Video Output fixed at Full HD @60 fps.
1 x SFP Connector for ARINC 818 Optical or 75-ohm Copper I/P.
2 x USB ports for keyboard and mouse.
1 x DP Port for GUI Application.
Onboard 512GB SDD for storage.

GUI

Trigger Modes: Immediate, Trigger On-Error & Order Set (IDLE, SOFi, SOFn, EOFn, EOFt)
Frame and Line information: Resolution (W x H), Refresh Rate and Color Format
Captured ADVB RAW data frames are displayed as an histogram and each ADVB frame can be viewed in tabular format. The table contains the parameters such as Word Offset, Dwords from B0(MSB) to B3(LSB), Data Field and Status.
Frame Container details like FC Frame Header, Container Header & Object 0 Ancillary Data
Container Statistics: Container Size in bytes, Total FC Frames, FC Frame 0 Size in bytes, FC Frame 1 – N size in bytes, SOFi Count, SOFn Count, EOFn Count, EOFt Count
CRC, Payload, Sync Loss, Frame Loss Error for the individual captured FC frames

ARINC818 Diagnosis
Order Set Detect Status: IDLE, SOFi, SOFn, EOFn, EOFt
Error Status: CRC Error, Disparity error, Out of Sync error, Payload error
Optical Link Status

HDMI to ARINC818 & ARINC818 to HDMI converter:

Streaming controls for HDMI-In to ARINC818-Tx and vice versa.
Resolution, Frame rate and color format configuration along with video timing details.

Standard and custom resolution configuration support.
Internal test pattern generator for ARINC-Tx.
Runtime link rate configuration.
User-defined data search.
Saving and Loading captured ADVB RAW data samples:

Captured Raw Data can be saved to a binary file (.iwacap).
Captured samples can be loaded from a previously-saved file for further analysis.

iWave’s ARINC Video Protocol Analyzer verifies the ADVB Packets against ARINC 818 Standard.
Supports link rates from 1x (1.0625 Gbps) up to 10 Gbps as FC standard.
Features HDMI to ARINC818 & ARINC818 to HDMI converter.
Enables to store the captured data in a file for ADVB frame analysis.