Documents
Design Support
Software
| Features | Details |
|---|---|
| On Module Features | Renesas’ RZ/G1M or RZ/G1N Dual Core ARM™ Cortex-A15 CPU @ 1.5GHz DDR3L SDRAM – 1GB (Expandable) SPI Flash – 2MB (Expandable) eMMC Flash – 8GB (Expandable) Micro SD slot Gigabit Ethernet PHY Transceiver USB 2.0 High Speed 2-Port Hub RTC controller JTAG Header SPI Programming Header |
| Qseven PCB Edge Interfaces | Gigabit Ethernet x 1 (through On-SOM Gigabit Ethernet PHY transceiver) USB3.0 Host x 1 USB 2.0 OTG x 1 USB 2.0 Host x 2 (through On-SOM USB 2.0 High Speed 2-port Hub) PCIe x 1 SATA x 1 (Optional) SD (4bit) x 1 LVDS x 1 SSI/I2S (Audio Interface) x 1 Debug UART x 1 Data UART (with CTS & RTS) x 1 CAN x 1 SPI x 1 (with 2 Chip selects) I2C x 2 PWM x 2 GPIO’s x 8 |
| Expansion Connector1 Interfaces | Parallel Camera x 3 (VIN0 – 8bit/16bit/24bit, VIN1 – 8bit/16bit, VIN2 – 8bit) Parallel LCD (24bpp RGB) x 1 Data UART x 1 |
| Expansion Connector2 Interfaces | SSI/I2S x 1 CAN x 1 SPI x 1 Data UART x 2 PWM x 1 Memory Bus (16bit Sync/Async) |
| OS Support | Linux 3.10.31 |
| General Features | Power Input: 5V Form Factor: 70mm x 70mm Operating Temperature: -40°C to +85°C(Industrial) Environment Specification: RoHS & REACH Compliant |

- PCIe x 1 Connector
- USB 3.0/USB 2.0 Host
- SATA x 1 22pin Serial ATA Connector (Optional)
- 100/1000Mbps Ethernet through RJ45MagJack
- 7” RGB LCD with Capacitive Touch
- I2S Audio Codec x 1 with 3.5mm Audio IN and OUT jack
- USB 2.0 Host through Type A Connector
- USB 2.0 OTG through Micro AB Connector
- Standard SD Connector
- CAN Header
- RTC Coin Cell holder
- Operating Temperature: 0°C to +60°C
- Form Factor: 120mm x 120mm


For any highly integrated System on Modules, thermal design is a very important factor. iWave Supports Heat Sink Solution for RZ/G1M Qseven SoM.



