Versal™ RF
System on Module
iG-G80M®
- Versal™ RF System on Module Compatible with VR1952, VR1902, VR1652, and VR1602 devices
- Up to 2,473.8K Logic Cells & 1,130.88K LUTs for FPGA processing
- RF input/output support up to 18GHz for wideband applications
- Up to 8 ADC channels (32GSPS) for high-speed acquisition
- Up to 16 DAC channels (16GSPS) for signal generation
- PCIe Gen5 x4 via GTM2 transceivers for ultra-fast data transfer
Documents
| Features | Details |
|---|---|
| SoC | Processing System (PS)
Programming Logic (PL)
AI Engine (AIE)
|
| Memory & Storage |
|
| Other Features |
|
| Board to Board Connector1 Interfaces (400pin) |
|
| Board to Board Connector2 Interfaces (400pin) | From PL Block
From PS Block:
|
| Board to Board Connector3 Interfaces (128pin) | ADC: 16 x ADC Channels up to 32Gsps DAC: 16 x DAC Channels up to 16Gsps |
| Software Features | Yocto / PetaLinux BSP with Vivado hardware support Linux driver support for PL (Programmable Logic) and DMA subsystems High-speed I/O and networking stack support (PCIe, Ethernet, etc.) RF data converter support (specific to Versal RF devices) Bare-metal and real-time low-latency application support Vitis development environment for acceleration |
| General Features |
|
*Under Progress
DAC Specification:
- 1 x Right Angle SMPM Connector on Front Panel with Balun (BW 2GHz to 50GHz)
- 1 x Straight Angle SMPM Connector with Balun (BW 2GHz to 50GHz)
ADC Specification:
- 1 x Right Angle SMPM Connector on Front Panel with Balun (BW 2GHz to 50GHz)
- 1 x Straight Angle SMPM Connector with Balun (BW 2GHz to 50GHz)
High Speed and Interface Specifications:
- Up to PCIe Gen4 x8 Edge Connector
- FMC+ High Pin count (HPC) connector
- 4 channel GTM2 Transceivers @ up to 56Gbps/112Gbps
- Up to 2473.8K Logic cells and 1130.88K LUTs
- GTM2 High Speed Transceivers x20/10 at 56Gbps/112Gbps
- Dual Channel (2x16bit) 8GB LPDDR5x from PS
- Dual Channel (2x16bit) 8GB LPDDR5x from PL
- Two Single Channel (32bit), 8GB LPDDR5x from PL
- Operating Temperature: -40°C to +85°C (Industrial)
- Form Factor: 254mm x 125.31mm (¾ Length PCIe*)
FAQs
The AMD Versal™ Adaptive SoC is a next-generation adaptive computing platform that combines CPUs, programmable logic (FPGA), AI engines, DSP engines, and high-bandwidth networking on a single device.
Unlike traditional SoCs or FPGAs, Versal™ devices integrate multiple compute engines connected through a high-speed Network-on-Chip (NoC). This architecture allows developers to run AI, signal processing, and embedded applications efficiently in a single platform.
Yes. Versal™ AI-enabled devices integrate AI engines and programmable logic for high-performance machine learning, vision processing, and real-time analytics. Our SoM solutions support various AI-focused device families, including AI Edge Gen 1, Gen 2, and AI Core making them ideal for low-latency edge AI applications.
Versal™ SoM platforms support multiple high-speed interfaces including PCIe Gen4 and Gen5, Ethernet connectivity, and multi-gigabit transceivers that can reach speeds up to 112 Gbps depending on the device family.
Yes. With support for high-speed transceivers, PCIe Gen5, and MAC interfaces up to 600G, Versal™ SOM platforms are well suited for networking, data processing, and communication infrastructure applications.
Versal™ devices are more advanced than traditional FPGAs because they combine multiple processing engines in a single platform. They integrate CPUs, programmable logic, AI engines, and DSP blocks to handle different types of workloads efficiently.
Key benefits include:
- Heterogeneous compute architecture for flexible processing
- Software-programmable acceleration for faster development
- High-bandwidth and deterministic data movement
- Integrated high-speed transceivers for multi-gigabit connectivity
- Scalable platform for AI, networking, and embedded applications
