November 18, 2026
Article
RFSoC Rugged SDR systems are designed to support modern radar, Software Defined Radio (SDR), Electronic Warfare (EW), and Signals Intelligence (SIGINT) applications, which are evolving rapidly.
They demand:
Wider RF bandwidths
Faster multi-channel data acquisition
Higher processing capabilities
Real-time signal analysis with minimal latency
Conventional RF architectures often struggle to meet these growing demands. Separate RF converters, high-speed processing devices, and complex system interfaces can increase design complexity, power consumption, and overall system size.
To overcome these challenges, next generation RF systems require a highly integrated, flexible, and high performance computing architecture capable of capturing, processing, and analyzing complex RF signals in real time.
“This is where iWave Off-the-Shelf RFSoC-Based Rugged SDR comes in “
The RFSoC Rugged SDR pairs two processing domains in one compact system. The AMD Zynq® UltraScale+™ RFSoC handles deterministic, highly parallel signal processing in its FPGA fabric, right next to the RF data converters. An Intel® Core™ Ultra COM-HPC Mini module acts as the host. It runs application software, system control, data analysis and visualization, with up to 64 GB of LPDDR5 memory and a 128 GB NVMe SSD for storage. A PCIe Gen4 x4 link connects the two, so data can move between them as your system architecture and transfer requirements need. Each workload runs on the resource best suited to it, which keeps the design flexible and application-specific while staying compact and integrated.
Fig 1: Inside the iWave RFSoC-Based Rugged SDR
The iWave RFSoC-Based Rugged SDR features a dedicated RF add-on card designed to support flexible, high-performance signal reception. It includes a four-channel ADC receive interface and three LNA-equipped receive paths covering two frequency ranges: 0.4–1 GHz and 0.7–6.0 GHz.
To maintain signal quality and provide greater control over incoming signals, the RF front end integrates low-noise amplifiers (LNAs) and digital step attenuators (DSAs).
Together, these features provide improved receive sensitivity and flexible signal-level control, making the platform suitable for demanding wideband RF applications.
Accurate timing is essential for multi-channel RF, distributed systems, radar, and electronic warfare. The iWave RFSoC-Based Rugged SDR includes:
These resources support coordinated RF operation, phase sensitive signal processing, and synchronized data acquisition, depending on the system configuration and clock distribution architecture
Built for demanding operating conditions, the iWave RFSoC-Based Rugged SDR features a compact, rugged metal enclosure measuring 220 × 178 × 88 mm. It supports Industrial Grade operating temperature ranges and incorporates a 3300 RPM cooling fan with speed control and onboard temperature monitoring to ensure effective thermal management.
The system operates from a 28 V DC power supply (18 V–36 V input range) through a D38999 power connector. It also complies with REACH and RoHS requirements, making it well suited for embedded systems and demanding field deployments.
To evaluate its reliability under demanding operating conditions, the iWave RFSoC Rugged SDR undergoes vibration, shock, and temperature cycling tests based on recognized military screening and environmental test methods. The equipment remains powered on during the specified tests to evaluate its ability to maintain operation under mechanical and thermal stress
| Test | Standard | Test Conditions | What It Evaluates |
|---|---|---|---|
| Vibration Screening | MIL-HDBK-2164 (Environmental Stress Screening) | 10 minutes per axis (X, Y and Z), unit powered on | Identify potential issues such as solder joint failures, loose connectors, and workmanship defects that may develop under continuous vibration. |
| Functional Shock | MIL-STD-810G, Method 516.8, Procedure | 20 g, 11 ms sawtooth pulse; 3 shocks per direction across ±X, ±Y and ±Z (18 shocks total), unit powered on | Evaluates the system’s ability to maintain functionality during sudden mechanical impacts and shocks. |
| Temperature Cycling | MIL-HDBK-2164 (Environmental Stress Screening) | 3 hours 20 minutes per cycle, 10 cycles (approximately 33 hours total), with the unit powered on during specified periods | Evaluates operational stability and potential component or interconnection issues caused by repeated temperature variations. |
These tests help assess the platform’s mechanical robustness, thermal stability and operational reliability, supporting its use in demanding radar, Electronic Warfare (EW), Signals Intelligence (SIGINT) and other field deployed applications.
We appreciate you contacting iWave.
Our representative will get in touch with you soon!
Accelerate mission-critical systems with iWave RF solutions.
Accelerate high-speed networking with iWave FPGA and SmartNIC solutions
Power connected mobility with iWave automotive solutions.
Power industrial automation with intelligent FPGA and custom design platforms.
Advance medical technology with iWave FPGA and embedded computing solutions.
Strengthen security systems with FPGA-based computing and cryptographic solutions.